Shot Plates





I usually stock a few extra plates, due to demand it may take up to a week or two to make and then ship.

2 Shot plates can fit into a Small Flat Rate Box. If you are buying multiple items, the shipping cart automatically adds shipping for each item, I will pack in the best shipping option possible & refund the balance. If you require additional insurance above the $50 that comes with initial box, Please let me know .. thank you and enjoy…


Shot Plate #1 “Multiple Shape” with Pusher $53 +shipping





Plate Measurements: 2in X 2in X 1/2in, Pusher: 3/8in X 3 in (Soft tool steel), Shot holes: 5mm, to 7.5mm, Made from tool steel & is hardened & tempered, *Do Not use in hydraulic press* All Shot Plates proudly made in my NM Studio


Shot Plate #2 “Starburst” with Pusher $53 +shipping





Plate Measurements: 2in X 2in X 1/2in Pusher: 3/8in X 3 in (Soft tool steel) Shot holes: 3.6mm, to 6mm Made from tool steel & is hardened & tempered *Do Not use in hydraulic press* All Shot Plates proudly made in my NM Studio..


# 3 SHOT PLATE/STRIP ” Starburst” with Pusher $53 +shipping





New Dimensions : 3in x 1 1/2 in x 1/2in (in picture 3 x 1 x .5 in)
Shot Size: 4.5mm to 7.5mm (ish), Soft Steel Pusher (will vary in thickness due to stock on hand) Hardened & tempered tool steel, *Do Not use in hydraulic press* All Shot Plates proudly made in my NM Studio..


Shot Plate #4 “Conical” with Pusher $53 +shipping





Plate Measurements: 2in X 2in X 1/2in Pusher: 3/8in X 3 in (Soft tool steel) holes: 3.3mm , 4.7mm , 5.7mm 6.7mm (ish) Made from tool steel & is hardened & tempered *Do Not use in a hydraulic press* All Shot Plates proudly made in my NM Studio..


#5 Shot Plate “High Star” $53 +shipping





Plate Measurements: 2in X 2in X 1/2in, Pusher: 3/8in X 3 in (Soft tool steel), Shots : 4.5 mm to 7 mm (ish), Block: A2 tool steel, hardened & tempered *Do Not use in hydraulic press*

It will take 3 to 4 rounds of annealing & hammering to achieve this kinda relief..